Nasco Sludge Judge II - Large Capacity Sampler, 1-1/4" O.D, 15' Overall Length

The Sludge Judge® II is made from a 1-1/4" (3.18 cm) outside diameter plastic tubing resulting in double the capacity and a very rigid unit when assembled. The unit is made up of three 5-ft. (1.53 m) sections (top, extension, bottom) or individual sections can be combined as required.

It holds 6 oz. per foot (178 ml per .31 m) and can be assembled according to the requirements of the job by adding or subtracting sections as needed.

There are 1-ft. (.31 m) markers on the tubing which will help identify the amount of sludge in the tank.

It is designed for sampling 5% or less solids; and should not be used for sampling ethanol or ethanol blended fuel.

The Sludge Judge is not autoclavable.

Comes with a one-year warranty.